Pac Onstar Radio Replacement Interface For Select '10-'17 Gm Vehicles

An all in one radio replacement and SWC interface, the innovative RadioPRO5 comes pre-loaded with OnStar retention, amplifier retention, SWC software, navigation based output signals and other features that save time and money during installation.

• Retains OnStar® when the factory radio is replaced
• Retains steering wheel controls (pre-programmed)
• Retains all warning chimes (chime module included)
• Retains factory reverse camera
• Chime volume adjustment (factory buttons)
• Retained accessory power output (RAP)
• Reverse wire output
• VSS (Vehicle Speed Sense) output
• Illumination output and parking brake output
• Includes antenna adapter
• Updatable using the PAC-UP

Compatibility Notes

Does not retain factory satellite radio
PAC-UP required to configure vehicle settings
Chevrolet Malibu, Buick Encore, Chevrolet Cruze, Equinox and GMC Terrain:
Must use firmware version 1.2.3a.4 or higher, Models equipped with navigation are not compatible
RP does not retain the HVAC backlight in vehicles with a monochrome display.
The separate LCD screen above the factory radio will not be retained.
2015+ Chevrolet Trax - Must use firmware version 1.5.6.6 or higher